BetaFPV F722 35A AIO flight controller

BetaFPV has released 35A AIO toothpick FC with F722 MCU. This is the first FC with F7 MCU from the BetaFPV. It’s 4in1 ESC is capable of delivering 35A (40A burst) of current to motors, supports 2-6S battery input and runs on BLHeli_32 firmware. It has plenty of UART ports (four and a half), large motor solder pads and the plug and play capable port for connecting the DJI digital VTX module.

BetaFPV F722 35A AIO flight controller pinout:

Available @:

BetaFPV: https://betafpv.com/products/toothpick-f722-2-6s-aio-brushless-flight-controller-35ablheli_32

Specifications

• Item: F722 35A AIO FC (BLHeli_32)
• CPU: STM32F722RET6
• Six-Axis: MPU6000 (SPI connection)
• Firmware version: betaflight_4.2.x_BETAFPVF722
• OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
• Support programmable LED like WS2812 etc
• Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
• Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
• Input voltage: 2S-6S Lipo
• Continuous current: 35A
• Peak current: 40A
• ESC firmware: BLHELI_32
• Built-in current sensor
• Plug & Play Ports for DJI Digital VTX
• Indicators: 2 indicators: receiver indicator (green)/Flight control power indicator (red)
• Capacitance: CS|5*10*13mm|470μF|35V
• Mounting hole size: 26mm * 26mm
• Connecter: 80mm 14AWG silicone cable with XT60
• Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series
• Weight: 7.89g