Happymodel Mobula7 – 2S brushless whoop
The trend for 2S brushless whoops has been set. After the release of 2S Beta65x and Beta75x whoops, everybody started releasing the new 2S models. The one of them is Happymodel Mobula7. It is 75mm base brushless whoop and is equipped with 0802 sized 16000KV brushless motors, spinning 40 mm four-bladed props. The heart of this aircraft is Crazybee F3 Pro 2S capable flight controller, 4-in-1 ESC and Frsky/Flysky/DSM in one board. Other specs also look good – MPU-6000 gyro with fast SPI bus, Betaflight OSD, Current Sensor,
The weight is 25.9 grams without the batteries. The Mobula75 comes with 3.8v 250mah 30C/60C Lipo batteries and you need to connect 2 of them in series.
On the negative aspects – 5A ESC‘s could be a little weak for 0802 16000KV, the 0802 motors have no ball bearings only the bushings and there is no smart audio for VTX control in some configurations (DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.)
Happymodel Mobula7 comes in Basic (with basic charger) and Standart (multiport charger) versions and also you can choose between FrSky/Flysky/DSM receivers.
Available @ Banggood: https://www.banggood.com/Happymodel-Mobula7-75mm-Crazybee-F3-Pro-OSD-2S-Whoop-FPV-Racing-Drone-w-700TVL-Camera-BNF-p-1357971.html
Features:
– New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
– 2S whoop more powerful and more flight time
– Betaflight support , multi flight mode: ACRO/AIR/ANGLE
– New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
– Smartaudio ready , change VTX bands, channels via OSD
DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
– Adjust the settings and the PID of the flight controller via OSD
– Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
– Flysky version support both AFHDS and AFHDS-2A protocol transmitter
– DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
– Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
– Full telemetry function ready
– Head lights ready
– Camera angle adjustable
– Real Bind and Fly version
– Buzzer Ready
Package Included:
Basic Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver
Standard Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery
1x Screwdriver